SYSTEM DESCRIPTION
Jet Elevel system consists of making lift up mounts and floors with concrete slabs ”in situ”, in an easy and simple way with minimal costs. Jet Elevel 250/500 dampers are integrated into the concrete; after setting, we act on the elevation bolts and lift the slab up, leaving only supported on elastic supports, thus obtaining a fast and efficient system of disengage conferring excellent anti-vibration properties for use in situations requiring high performance. Its anti-vibration features are given by the dampers that will be installed according to the load and distribution of support.
There are two types of shock absorber for two different loads, a 250 kg and 500 kg, both are made of rubber 35 ° shore. The thickness of the concrete slab is 100 mm; other thicknesses can take place with the application of height adapters.
Among the advantages of the Jet Elevel system, highlights the fact that do not retains rainwater as other systems, it installation can be performed on uneven terrain and even in different places than their final location, which can be transported with hooks of travel.
INSTALLATION AND STARTING WORK
– Cleaning the floor or stand where it’ll be install.
– Application of PE polyethylene film on the surface where it’ll be install.
– Implementation of a formwork, marking the fill level of concrete.
– Distribution of shock absorbers according to the calculations.
– Installation of a corrugated steel mesh of 200 x 200 x 8 mm.
– Pouring concrete with a resistance depending on the thickness and the load to be supported (minimum H 250).
– Vibrate the concrete for homogenizing the slab.
– Once the concrete has set, remove the formwork.
– Replace the screw cap from the elevation screw.
– Progressive elevating all of the dampers, performing this operation in four phases.
PACKAGING
Each unit comes with: individual box, manual assembly, lifting screw, threaded protective cap (to be used in the process of concreting) and shock of the series chosen.
Minimum delivery: four units
NOTE: Our technical department will provide the information for the calculation of the system or we will calculate and give you installation manual and assembly drawing.